CNC Lathe Turnig Tool TNMG220408-DM Tungsten Carbide Inserts Metal
A carbide insert is a cutting tip used on a larger tipped tool
whose shank is made of another material, usually carbon steel. This
offers the benefits of a carbide cutting interface without the high
cost and brittleness of making the entire tool out of carbide.
1. Double-sided chipbreaker PM with M-level tolerance has higher
strength of cutting edge. It is suitable for semi-finishing under
unstable working conditions as well as machining cast iron with
small cutting forces.
2. CVD coating has a peculiar gradient cobalt-rich on surface of
the substrates which can ensure the inserts high performance.
3. The coating materials are MT-TiCN0-Al2O3 with thickness of 14μm, which have high abrasion resistance. After
special management on the surface of the coating inserts, the
internal stress and surface of coating were reduced while cutting
resistance was also cut down.
4. CVD coated carbide grade,Universal grade,suitable for steel and
cast continuous cutting and interrupted cutting finishing to
WNMG080408-PM Tungsten Carbide Turning Inserts CNC Lathe Machine
External Cutting Tools
XHC151:Substrate with excellent wear-resistance,in combination with
MT-Ti(CN),thick layer AL2 O3, TiN coating.It is an ideal grade for
the finishing steel,cast steel and stainless steel under gigh speed
and dry machining.
XHC251:Cutting edge with special strength and toughness,in an optimal
combination with MT-Ti(CN),thick layer AL2 O3,Tin coating.itis a
suitable grades for a wide application.It is good for the
finishing.Semi-finishing and Light roughing of steel,cast steel and
XHC351:Substrate with high strength and resistance against plastic
deformation,in combination with MT-Ti(CN),thick layer AL2 O3,TiN
coating.It is suitable for light roughing and roughing steel,cast
steel and stainless steel.
XHM151:Substrate with special structure,in combination with Ti(CN),thin
layer AL2 O3,TiN coating .Withthe resistance against diffusion
wearness and plastic deformation,it is good for finishing and
semi-finishing(turning as well as boring)of stainless steel.
XHM251:Substrate with good toughness and stength,in combination with
Ti(CN),thin layer AL2O3,Tin coating .It is a premium grade for
semi-finishing to light roughing (turning and boring) of stainless
steel at continuous and intermittent machining conditions.
XHM351: Ti(CN),thin layer AL2 O3,Tin coating with very good strength and
impact resistance.It is suitable for roughing turning of stainless
steels at low to moderate cutting speed or interrupted cutting,also
for high cutting speed and heavy cutting in P30 area.
XHG102: in combination with PVD TiN,TiAIN coated carbide grade.Suitable
for finish machining of cast iron.
XHG151:In combination with PVD TiN,TiAIN coated carbide grade.Suitable for
semi-finish turning of cast iron.
XHG252:In combination with PVD TiN,TiAIN coated carbide grade.Suitable for
rough machining of cast iron.
CNC Inserts Available:
Carbide turning inserts specifications :